Видео

3 tons if you plan to have all 4 corners on stands. 2 tons for one end or one side. For passenger cars that is. Full size SUVs & Pickups will be a different story. Much taller jack stands can be too tall for the jack being used.

I don't know where you live but i been a rockauto customer for like 10 years never got returned parts or wrong parts whenever you spend $100 dollars in rockauto thats $200+ on your local part shop

Rock auto is the best. Many times better than the cheap trash in the local auto parts stores. Keep it up Rock auto

mine had the exact same issue! i pulled the valve covers off to repace valve seals and lifters, when taking the intake off i found metal pieces just like yours! cleaned it out put it all back together and checked for debris with a magnet in the combustion chamber and there was a small piece that made its way. got it all together and a few weeks later my engine locks up. pulled the intake off and found the same metal pieces but larger than before

Rock auto has saved me thousands of dollars just over the last few years. I guess I’ve gotten lucky and the only SNAFU’s I’ve had have been manufacturer issues. (Moog has sent the wrong hub seal a few times.)

Awesome bro. I had another video I was watching. Then realized that vehicle didn't have the fan. This is exactly what I needed. Thank you

thanks for the video. ive had leaking issues with my 2000 for awhile now and just realized that stupid blue hose just crumbles when grabbed so im going to have to replace both sides now. I think depending on the age of the hose it might not be a great idea to blast it with the old air compressor cause most likely it will explode that crap material. Any suggestions on a better type hose to replace it with would be appreciated. Just like some of the electro mechanical things like door lock actuator’s which i cant find a straight answer anywhere to who makes the most durable replacement parts for this trouble child vehicle.

Curious, what year is it? I have a 2010 ram 1500. Wondering if it pretty much the same way.

Prussian Blue Machinest dye usually used on valve lapping compound jobs to seal the seats it'll shoe any imperfections ! If so you got more lapping to do

That’s straight up Harbor Freight levels of warranty. I love Proto but I think Wright has converted me lol

Watching this in 2024 thank you bro was lost af when I started

That's NUTTS, I'd NEVER put a wrench. I'd rather a solid piece of wood or a flat wide piece of steel but NEVER a wrench...cmon now.😮

Been dealing with them for years never had any problem

Bad experience with rock auto 2005 Honda pilot AC system was good just the windings for the clutch went bad ordered compressor from rock auto put it on and the clutch was bad started smoking because orifice tube and dryer was not ordered. They would not give us a good one in return When the one they sent was bad from the get-go so I figured I’m out $200 now trying to salvage the situation I took the compressor apart from rock auto the snap ring that supposed to hold. The windings in place was not properly installed, and the internals of the compressor were totally crapped out, I checked the ohms reading from the one from rock auto was able to use the clutch off the rock auto compressor and put onto my good old one that the compressor part still worked, but the crappy part about rock auto is there’s not a human being to talk to so you can explain the situation to That is very shitty on their end. I most definitely would never buy an AC compressor from rock auto again.

The Craftsman double box wrench set made in USA are resealing on eBay for 800$ original price 100$ and the Craftsman professional black and red with gold letters 25 pc set resale for 800$ u know they look like the snap on ones but Craftsman made them first and if u find a snap on tool that resale for more the original price 😂 the snap on dealer makes sure u can resale for half the original price 😢

Rock auto is a retailer. If you buy garbage, it's not their fault

And the best reason to own snap on is when u get all your tools stolen when you out the house like it happen to me

Snap on lifetime warranty is only if you are alive your children can't warranty nothing lets see you warranty old snap on granpa own

The Craftsman professional screwsdriver are selling for 800$ and I think they are going to get more expensive on eBay there are no snap on resale for more than original price

Dude, you just saved me $300 in labor. awesome post man

Not sure, but they just have a much better price period. Your Vin number will give you the right parts. Without it you'll run into a universal parts that sometime are not the same.

This is ridiculous! Why do you have to remove all this stuff to get to the battery? We bailed these jackasses out for this?

Is that the 4x4 short drive shaft or the one from transmission to the rear end

Im glad i came across this video. I was going to buy jack stands from harbor freight

What is the drawer dimensions of your toolbox? I’m trying to see if the blow molded case will fit in mine.

This is such a dumb problem to begin with. Why introduce a sunroof, you know leaks and THEN build a plumbing system around it knowing full and well that over time, it will fail. This is why we don't have nice things anymore. Manufactured flaws to destroy your vehicle so you keep consuming. What an asshole design.

Very helpful keep making videos

For anyone still having issues, there are also rear drains on the sunroofs. The hoses come off the back of the sunroof and go back behind the rear door into the C pillar. The rubber grommet for them is in the frame so you have to dig inside to get to it but the bottom drains can plug up or the rear hose can leak too. In some vehicles, like the Jeep Commander, the front drains and hoses might be perfectly fine and you'll still find water on the floor of the front seats, but it is actually the back hoses that is leaking or clogged. The water can get trapped inside the frame of the vehicle and its only path out is to follow the wiring harness to the lowest point which will fill up the floor of the front seat. It is the same for driver and passenger sides, check the rear hoses as well.

I'm guessing that grinding bit is likely a carbide tip

Yes, I also had that code and still had that code. I replaced the lever with the aluminum one actually took the intake off after I did the timing chain job and made sure that all the flaps worked and all the actuator vacuums were working and they did nothing was binding so I put the car back together and I still have a 2004 code. I'm thinking the whole intake. Manifold should be changed. Maybe one of the electrical solenoids doesn't work.Because all the vacuum hoses are working and actuators, hold vacuum

I’ve had great dealing with wright customer service!

Bryan hope you your wife and the family are doing good.

So for $400 today you can only get the ratchet, hammer, and spark plug socket.

Great video series Bryan...it helped me immensely as I am old school Mopar. Question: The freeze plug kit came with 10 ea. 1-3/8 plugs and 1ea. 11/16 plug .Where does the small plug go...did I miss it somewhere?

You demystified this for me, and saved me a couple of hundred dollars from having the dealership do it. Thank you for an excellent video, sir.

I LOVE Wright Tools, have all of the models of that ratchet, 1/4 though 1/2, including the one you warrentied. Mine has held up no problem, but to be fair I have only used it in low torque situations.

Thanks for the video! My 2016 back seat was stuck in the upright position, and I had no idea how to get it down. Unfortunately, it gets stuck now every time I put it up. 😕 Tried lubricating, but it still happens. Guess I'll keep the screwdriver in the truck! Lol

Good video, thanks be safe

Very well explained. Thank you!

I am in the middle of a shipping nightmare with them. If you need your vehicle fixed in a timely manner, forget these idiots.

Thank you, Brian. Information such as this is so valuable; many blessings to you (..and Dez.)

It's bent as fuck

Nonexistent customer service heaven forbid you've got to return something they're going to nail you on return shipping even if it's their fault, I'm out

What an amazing video. Husky should hire you as a mechanic sales/tech. Thanks

Best dam video out there !! Your recording style and editing is perfect. Thank you

Sweet

Why didnt gm put a pull handle there is what i want to know 😂

Hi Bryan, question please.. would you be able to use the jackstand on its base height without locking it on its first "tooth". Please advise. Thanks.

Rock auto sells good aftermarket but they are aftermarket typically of lower quality than OEM. Rock auto offers "wholesale closeout" which are return (defective) products and/or factory rejects. A 1/2 price monroe strut was defective as was a discount Borg warner coil, a borg warner EGR received was a Toyota reject although OEM was of lower quality like damaged fruit or possibly worse counterfeit.

Well done, Mate! All Hold bolts should be epoxy high-strength fixed into concrete. Do not use Tru-Bolts, Dyna bolt or USA wedge bolt